Quartz0 High Density Base Coat - 30ml

Quartz0 High Density Base Coat - 30ml
Brand: Quartz0
Product Code: Model
Availability: In Stock

Quartz0 High Density Base Coat - 30ml

Quartz0 High Density Base Coat- a cutting edge nanotechnology in surface protection. High Density Base Coat is designed for detailers who is seeking to take paint protection to the next level. Formulated with high volume and purity of silica content that will crystallised into a transparent harden material commonly known as glass or ceramic coating. Quartz0 High Density Base Coat is designed to provide strong adhesion to treated surface providing excellent hardness and durability. High Density Base Coat can be applied to paint, metal and plastic. Unlike wax and sealant, High Density Base Coat will formed an extremely strong bond and will add a measurable 2 to 5 micron (depending on application) thick of protection. The coating will protect your vehicle from weathering, UV-damage and light wash scratches for up to 3 years or more.

Quartz0 High Density Base Coat primary provide high hardness, clarity, reflection and adhesion to treated surfaces, however it has poor water repellency and is not recommended to use as a standalone coating. The coating can be layered on for thicker protection with a minimal of 2 hours drying time in between coat. It is highly recommended to layer Quartz0 Hybrid Top Coat or other suitable top coating after at least 2 to 12 hours (Depending on ambience temperature) for solid water repellent effect. 

For optimal result, High Density Base Coat must be applied on dry, wax free, oil free and properly polish surface. Only use product on car that is out of direct sunlight and treated surface temperature should be at room temperature (20-30 degrees). Apply product to microsuede or microfiber applicator and apply on the paint evenly in a straight line motion making sure all areas are covered. Leave product on for 20 to 30 minutes (20-30 degrees) before wiping off twice- first wipe is to remove most product leaving behind only some smear while second wipe is to ensure all smear is gone leaving behind an even finish. Treat few panels at a time (average application speed) and make sure all smear is removed before moving on to next panel. It is recommended to change to a new microsuede or microfiber applicator if the coating application process is not completed within 15 to 30 minutes.

Made in Japan

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Shine Cars © 2008-2019